How to install tankless PrecisionTemp water heater

So I have  all the fasteners out now and you see  there’s these corner pieces so I’m gonna  just push out this door or pops off like  this  so now we have that awful take the door  off that’ll make it easier for us set  that back here okay  and we’ll take this this corner piece  out so now we’re ready to start trying  to pry this back and like I said I’m on  it to try to use the plastic putty by  Ken Oz don’t want to  don’t want to scratch up my  see how well we can do to  let’s see over there  to turn the bottom  yeah yeah let’s see if anything comes  out drop my plug here I’m gonna go ahead  and try to thread that just smoothly  back in just uh get lost  okay all right so now it’s just uh  slowly slowly  use this out  all right now I may not be a video major  I realized that dead space there was not  good I’ll try to edit that out  now with that have a nice clean opening  uh I’m easily send my platform uh means  to see my wine let me take the camera  off and show that there you go a little  bit of sealant left around the edges and  I’m going to try to clean up because um.

I expect the flanges on the new one are  going to go over that and we want that  to be a clean flat surface for the new  butyl tape – to go on you see there’s a  platform built in here so for the water  heater to sit on I’m hoping that I’m  hoping that don’t have to make any mods  there I’m hoping this one will just  simply slide in and sit on this sit on  this platform the way it is you can see  here here’s that here’s that 110 that I  cut that we’re not going to use anymore  before I I’m going to go ahead and get  some electrical tape and I’m going to  I’m gonna tape that off and put that  back out away um since we’re not since  we’re not gonna use that anymore  okay.

So well you said all I did there is  um put two pieces of tape over the end  the length of the wire here and then  just wrapped around there that should  mess you pretty much feel that  connection off again this is not hot it  shouldn’t come on with that circuit  breaker in the off position and  ultimately I might just if this is truly  dedicated to that breaker i might just  pull that breaker and just to ensure  that then never does become hot  okay so um as many my friends know I  sometimes get ahead of myself and I  thought I I measured this the best I  could with the unit in and I thought  that I came up with the right rough  dimensions that this opening would be  large enough for the new unit to go in  while the cameras been off what I just  just found is that’s not the case of  course I need another inch and a half up  here to make this uh to make this work  so I’m not exactly sure how I’m gonna do  that yet I’ll bring the video back on  when I do obviously obviously my  obviously what I’m planning to do.

I  guess is because hey I’m not putting the  six gallon water heater back in that’s  while I could it’s not an option for me  at this point I have this new beautiful  one sitting here I’m not gonna put in  the six gallon back in um so the only  concern I have is this is framed this is  aluminum framed just for the sides so  what we’ll have to do is we’ll have to  solve all up to that extra inch and a  half that we need and cut this top piece  out then I have a buddy who’s contractor  coming over and he’s coming over now and  we’re gonna we’ll figure out you know  how we’re going to shore this up and and  either reuse this piece or just put some  wood in there I’m thinking we’ll just  put some wood  across will shore it up over here and  here and that’ll be our top top piece so  I’ll come back once we once we get that  sewer down  okay so I I’m back some time has passed  and prepared as I tried to be to have  everything set up the one thing I just  said I did I did not account for how  Paul this thing was when I did my rough  measurements.

So I am having to cut out a  piece that’s about an inch and  three-quarter inch and a half inch and  3/4 so that I have the clearance to push  the new heater hand what I’ve done  anything anytime is I’ve had to run and  get some metal jigsaw blades I have a  high speed tool of course my battery’s  dead or my my souls all and and I picked  up some l-brackets so I’m going to use  2-inch L brackets and once I get this  metal piece out and I’m going to move it  up in the frame up here I’m going to use  2-inch L brackets to secure in the  corners and reattach no there’s no  aluminum vultures down here so what I’ve  done now is I’ve cut up these corners  I’ve used a high-speed tool to give me a  cut through in here I’m across on the  other side and I’m gonna use my jigsaw  to come across the other way now I was  trying to hold this corner so it doesn’t  vibrate but of course my  of course my plate well the jigsaw is  going to make that difficult so let’s  see  we must switch tools and go back to  using my high-speed tool to make these  cuts jigsaw seems to be  all right now the cuts don’t have to be  perfect there is a flange that’s going  to go up here but you want it to be as  straight as possible so this lets see  where I’m at okay.

How to fix a slow filling WC cistern

I won been asked by somebody about their WC taking a long time to fill up what the problem might be there are quite a few reasons or one of the main reasons can often be the ballcock value can be blocked with piece of rust or rubbish in the seating but a lot of reasons can be that you have slow tank fit pressure in your bathroom. Shoptoilet blog is all about toilet problems, guides, reviews and much more. Keep visiting and learn latest tips and information.

So you’re cold by its intact bath tap and your toilet WC system is fed from a tank in a loft if that’s the case you may well have a high pressure seat that’s in your ball cock in a toy which is restricting the flow and causing it to take a long time to fit up so I’m going to look at that now and show you how to easy when we do this problem right on the counter here on the worktop.

I’ve got three for your ball valves here come out beer systems um now generally this is the old tightly depart tune part one valve some other little spell the top but basically when you’re in the system you just see that part of it just undo the nut turn off first obviously undo the nut and have a row take the valve out or come away like this and you should be able to see what type of seating is going there now that is a high pressure signal and it will top out like.

So you can see there is a brand new high pressure seating now if you’ve got low pressure or upstairs that will really restrict the flow of water I you really find it that slow so what to do or hope is at hand because there’s your seating out of there but here for just 10 pence is what’s called a low pressure seating okay just.

So you understand this is the high pressure one okay because it’s got a very small hole and that is for mains pressure and this one is below pressure one for low pressure systems if your toy and cistern upstairs is fed from the tank in the loft and what we got to do is put that back in there and connect it back up there is normally a washer there by the way but I haven’t got one to show you because an on board but there is normally little fiber washer in here pull that back and you will find when you turn the water back on but that will flow lovely and fast and fill up really quickly.

Now that is for a brass one there are other types of ball valves and here’s a particular one you get a lot of the plastic ones that like this now again it will have a high-pressure see fit usually a standard in there like so they use the standard fit just get it out and often with ease you’ll see this on the end of the valve board you see so you can change it to a low pressure to pull that out and as you can see that is a low pressure Seaton put it in there and do your nut back up as on that one the same same sort of nut arrangement do it back up and there you have it again this very last one this is a bottom feed.

One but still the same type of arrangement you still have a spot light that will come through the bottom and attorn it just undo it there okay now if your sister undo it again you can see there’s the eye pressure seen just take it out and put this low pressure one on alright put it back and do it back up and the thing will feel really fast and quickly and you’ll find it once again younger wait hours for the hold WC system to fit up okay well that’s about it for me just a quick tip that someone asked me about that I pass on to you guys okay go to our for a vo is dirt and 33 thanks for watching bye bye.

What Is The Most Wanted On The Internet?

For everyone who active on internet marketing, they use the SEO strategy to bring visitors to their website, they will focus to find the topic that always searched by people on the internet, then they will more often write articles about it and try to win their article position in Search Engine such as Google, Yahoo and MSN. It seemed, it’s the secret how SEO or search engine optimization plays a big role on the internet marketing strategy.

Of course, I do not actually sure what the most searched on the internet. But if, which is always hunted from the past up to now such as: extra income, jobs opportunity, new business, knowledge about how to make  money, good investment, learning business, free business, online business, internet marketing, residual income, work from home, blog money maker, how blog can make money and so forth. Indeed, these topics are common and often in reviews, so competition is very tight. However, if you feel able to compete in the keywords above for the consistently, you will manage to make it as your tool or weapon to battle in the field of internet marketing.

The easier strategy to win in SEO is to write about your website topic that a lot of searching but still less people who reviews on the same topic, in this case are competitors. By doing this, the keywords will work effectively on the SEO. So how do I find what is often sought but few competitors? You can use tools like Google Keyword Tool, try searching on and type in “Keyword Tool”, then you will get what you are looking for.

The success of SEO is measured by how smart on selecting keywords for the article that mostly used by internet surfer to search for goods or services which possibly people buying your product. When SEO works, traffic is generated by people who use keywords that lead them to visit your website. Similarly SEO can increase website performance such as Alexa and Google page rank or PR. Page Rank and link popularity is a measurement for the website performance, especially to the paid blog review blog and affiliate program. Visitor came from SEO is unique which the best result when they click on PPC ads such Goolge Adsense.


Why Email Marketing is Rapidly Increase Nowadays

Marketing is an important part in every businesses. Especially such as now, when we are facing the global economic crisis; marketing absolutely have to be  be done in order to make profitable business or at least enable to cover daily overheads.One of the many ways of marketing is through the email.

Nowadays many companies are doing their marketing via email, why? The main and very basic reason is because of low cost. Probably, its almost FREE marketing method.

Compare to sending mail using direct mail [letter, email marketing is economical. If you use regular letter, you need to spend some money for design, printing, and postage. Marketing through email is really affordable for everyone.Email marketing also allows you to reach more prospects with less time effort. To perform successfully, you need more bio data from your data base.

More data you have, more target can be reached. What you need is to send them more information you on promotional products. When they interested on the items, they might make  some deals.

Even though direct mailing still apply for some people as old method and the mail recipient to check their inbox, but I believe more people prefer to check the email.

Furthermore, checking email is more convenience. According to the source, the cost to reach five hundred emails, less than a quarter of the cost of reaching five hundred direct mails.Another reasons why email marketing still the most effective from other method is because it takes less work and human resources required.

Beside, I will cause of increase on the labor budget. It seemed that email marketing is the most effective and efficient for everyone so far.

Zero Risk Investment – Start Your Business Online with Blog

If you want to run a business online but you have problem with the capital for your investment, start your business online with blog is right step. In business online, the capital uses as an investment. Usually you need to put some money or buy some product offered by online business person to complete task or to build website as your online business tools.  For online business marketer, it’s a way of marketing strategy.

Besides no capital required, there are also several advantages when you start a business online through blog:Blog has simple features to use Blog is a mini web that easier to manage. With ready features to use, it’s easier for users to update with a single log in to your account that can be done not only through the computer, but can be done while you’re traveling through a mobile phone that has supporting feature. Therefore, online business use blog will give you time efficiency.

Improve your writing skills Blog has content that dominated by writing. If you use a blog for your online business would need to pay attention to your blog content. Therefore, have the expertise to write about writing is important. Blog is a means to learn to write without boundaries.

No need Special expertise to start You don’t need special skills to start a business online with a blog. You can do improvement and development while running. From there, you can see which needs to be done or not. While studying the way that my purpose here is not their own learning, but learning business online by visiting the sites of the online business is already successful, view the video you tube and some media-related business online.

Besides being used for online business, blog can also be utilized as talent creativity. How blog use for online business? You can sell software or hardware product, goods and services through blog, promoting your online and offline business. But mostly, people use blog as online business which provides useful content for internet users. In the same time, blogger earn money from their blog from ads, affiliate program, commission, review and sponsorship. So, learning online business using your blog is great start and zero risk.